5 Proven Techniques to Remove Gorilla Glue from Granite

how to get gorilla glue off granite

How To Get Gorilla Glue Off Granite?

To get gorilla glue off granite, use a mixture of warm water and dish soap, and gently scrub the affected area with a soft-bristle brush. Accidents happen, and one of the most common ones is spilling glue on granite surfaces.

Gorilla glue, in particular, is a strong adhesive that can be tricky to remove. However, there are simple steps you can take to clean it off without damaging the granite. Using harsh cleaners or scraping the glue with a sharp tool can cause scratches or discoloration on the surface.

It is always best to use a gentle approach that won’t compromise the integrity of the granite. With patience and the right tools, you can successfully remove gorilla glue from granite countertops, floors, or any other surfaces.

Using Acetone-Based Products – The Classic Way

If you’ve accidentally spilled gorilla glue on your granite surface, don’t fret. Removing the adhesive from granite is not impossible. Using acetone-based products is one of the classic ways to remove gorilla glue from granite, but it requires proper techniques to avoid damaging the surface.

What Is Acetone, And How Does It Work?

Acetone is an organic compound used as a solvent in many cleaning products, including nail polish remover, paint thinner, and adhesives. Acetone works by breaking down the chemical bonds that make up the polymerized adhesive in gorilla glue, causing it to lose its adhesive properties.

When To Use An Acetone-Based Remover

Acetone-based removers are effective in removing gorilla glue from granite surfaces, but they should only be used if other methods have failed. Other safer methods, such as using soap water, should be tried first before resorting to acetone-based removers. Acetone-based removers should not be used on painted or plastic surfaces as the harsh chemicals can damage the surface.

How To Apply Acetone On Granite, Tips, And Precautions

When using acetone-based removers, it is essential to follow the appropriate precautions to avoid damaging the granite surface. Here are some tips:

  • Read the manufacturer’s instructions and strictly follow the safety precautions.
  • Wear gloves to protect your skin from the harsh chemicals.
  • Use a clean, white cloth to apply the acetone onto the glue spot.
  • Apply only enough acetone to saturate the glue and avoid spreading the product too far onto the stone surface.
  • Allow the acetone to sit for a few seconds to dissolve the adhesive.
  • Gently scrape off the glue residue using a plastic scraper or a damp cloth.
  • Repeat the process if necessary, but avoid using too much acetone as it can damage the granite.
  • After removing the glue, clean the surface with mild soap and water, and dry it with a clean cloth.

Using acetone-based removers is one of the classic ways to remove gorilla glue from granite. However, it should only be used as a last resort and with the appropriate precautions to avoid damaging the surface. With these tips and techniques, you can remove gorilla glue from your granite surface with ease and confidence.

Using Heat To Break The Bond – Simple Yet Effective

Gorilla glue is a powerful adhesive that can bond to all kinds of surfaces, including granite countertops. Removing gorilla glue off granite can be a daunting task, but using heat can be an easy and effective solution. Here’s what you need to know:

How Does Heat Dissolve Gorilla Glue?

When exposed to high temperatures, gorilla glue expands and loses its adhesive properties, making it easier to remove. The heat breaks down the glue’s bond and allows for a more natural removal process.

Preparing Your Granite Surface

Before applying heat, it’s crucial to prepare your granite surface to avoid damage. Here are some important things to keep in mind:

  • Cover the surrounding area with a protective layer, such as a drop cloth or masking tape.
  • Remove any excess glue using a scraper or razor blade.
  • Clean the surface using a gentle soap and water solution. Dry it completely before proceeding to apply heat.

Safe Ways To Apply Heat For A More Natural Removal Process

It’s important to use heat safely when attempting to remove gorilla glue from granite. Here are some effective and safe ways to apply heat:

  • Use a hairdryer or heat gun to apply heat to the affected area for several minutes. Move the heat source around to avoid overheating one spot.
  • Place a hot, damp cloth over the glue for several minutes. The steam will help loosen the bond.
  • Place a warm cloth over the glue and leave it for several hours. The heat will break down the bond slowly.

Understanding how to use heat to remove gorilla glue off granite is a simple yet effective solution. Take the necessary precautions and use heat safely to restore your granite surface to its original state.

The Power Of Isopropyl Alcohol – A Versatile Cleaner

Gorilla glue is a robust adhesive that can firmly attach to almost anything. If you’ve ever tried to remove it from a porous surface like granite, you know it can be a nightmare altogether. However, with the right equipment, getting gorilla glue off granite need not be a challenging or stressful process.

One versatile cleaner that is ideal for removing gorilla glue from granite surfaces is isopropyl alcohol. In this section, we’ll discuss what makes isopropyl alcohol an excellent option for glue removal and how you can use it without damaging your granite surfaces.

What Makes Isopropyl Alcohol An Excellent Option For Glue Removal?

  • Isopropyl alcohol is an effective solvent that can dissolve gorilla glue and make it easy to remove without leaving any residue.
  • It is readily available and affordable, making it a go-to cleaning option for many homeowners.
  • Isopropyl alcohol evaporates quickly, leaving the surface clean and dry, and it’s also less likely to cause damage to the granite surface than other solvents or chemicals.

Is It Safe To Use On Granite Surfaces?

It’s essential to ensure that you don’t damage or stain your granite surface when cleaning it. Luckily, isopropyl alcohol is safe to use on granite surfaces. Here’s why:

  • Isopropyl alcohol will not stain or damage granite surfaces when used correctly.
  • It’s also non-toxic and safe to use around food prep areas or when cleaning kitchen tools and surfaces.
  • Finally, it’s flammable, so be sure to avoid any sources of ignition while applying it to your granite surface.

How To Apply Isopropyl Alcohol Without Damaging The Granite

While isopropyl alcohol is safe to use on granite surfaces, you still need to take certain precautions to ensure that you don’t end up causing any damage. Here’s what you need to do:

  • First, start by cleaning the surface with warm water and a mild soap. Rinse it thoroughly afterward with water and dry it completely with a clean, soft cloth.
  • Once the surface is dry, pour a little isopropyl alcohol onto a clean, soft cloth or sponge. Don’t use paper towels or anything rough that could scratch the granite surface.
  • Rub the affected area gently with the cloth or sponge, applying more isopropyl alcohol as required. The glue should dissolve, and the granite surface will be clean.
  • Rinse the area with water once you have finished removing the glue and dry it with a clean, soft cloth.

Isopropyl alcohol is an incredibly versatile cleaner that can make cleaning gorilla glue off granite easy and straightforward. The key to getting the best results is to follow the steps carefully and use the right tools when cleaning your granite surfaces.

Going Deeper With Razor Blades – Scrubbing Tough Stains

Gorilla glue is a tough adhesive and can be challenging to remove from granite. Using a razor blade to remove gorilla glue from granite can be effective when done safely and skillfully. Below are situations that call for using a razor blade and the steps to take to ensure safe and effective removal.

Situations That Call For Using A Razor Blade

  • The gorilla glue has dried and cannot be removed by gentle scraping or using soapy water.
  • The glue has spread to a large area and needs to be removed more quickly.

How To Use A Razor Blade Safely And Effectively On Granite

  • Familiarize yourself with the razor blade. Hold the razor blade with a firm grip, angling it at a 45-degree angle. Ensure that it is sharp to prevent any damage to the granite.
  • Begin scraping the glue gently with the angled razor blade. Move the blade away from your body and use slow, steady strokes.
  • Avoid using excessive force or pressure as either could cause scratches on your granite. Be patient and take your time, especially if the glue has dried and is proving stubborn.
  • Rinse the blade often under running water and avoid scratching your fingers or the granite.

Protecting Your Fingers And The Granite From Scratches

  • Wear gloves to safeguard your fingers from any accidental cuts or nicks from the sharp blade.
  • Make sure to use a sharp blade, which will decrease the risk of scratching the granite.
  • Take breaks frequently, as prolonged use increases the possibility of injury to your fingers and damage to the granite, especially if you are using a lot of force.

Removing gorilla glue from granite can be tricky, but using a razor blade can be an effective solution when done safely and effectively. By protecting your fingers and the granite, working patiently, and avoiding excessive force, you can get the job done without damaging your granite countertops.

Frequently Asked Questions For How To Get Gorilla Glue Off Granite

How Do I Remove Gorilla Glue From Granite?

To remove gorilla glue from granite, mix water and vinegar. Soak a cloth in the mixture for 5-10 minutes and place it over the glue. Use a plastic scraper to remove the glue carefully. Repeat the process multiple times if required.

Can Baking Soda Remove Gorilla Glue From Granite?

Yes, baking soda can remove gorilla glue from granite. Mix baking soda with water until you get a thick paste. Apply the paste onto the glue and let it sit for 10-15 minutes. Use a plastic scraper to remove the glue carefully.

Isopropyl Alcohol Remove Gorilla Glue From Granite?

Yes, isopropyl alcohol can remove gorilla glue from granite. Saturate a cloth with isopropyl alcohol and put it over the glue. Leave it for a few minutes, then use a plastic scraper or your fingers to remove the glue carefully.

Repeat if necessary.

How Do I Prevent Gorilla Glue From Damaging Granite?

Prevent gorilla glue from damaging granite by avoiding its contact in the first place. Cover the granite with masking tape or plastic wrap while using gorilla glue. If glue accidentally gets on the granite, use the above methods for removal as soon as possible.

Can I Use A Razor Blade To Remove Gorilla Glue From Granite?

Using a razor blade to remove gorilla glue from granite is not recommended. It could cause scratches on the surface and damage the granite. Use a plastic scraper or your fingers instead to remove the glue carefully.


After following the steps we have outlined in this article, you can remove gorilla glue from granite safely and effectively without causing damage to the material. The key is to act quickly upon noticing the spill, avoid abrasive materials, and use gentle cleaning agents.

Remember to protect your hands and eyes with gloves and goggles, and always perform a spot test before applying any solution to the surface. With these precautions in mind, you can enjoy a beautiful, clean granite surface free of any adhesive residue.

We hope this guide has been helpful in resolving your gorilla glue mishap, and that you can apply these methods to other types of surfaces as well. Don’t hesitate to ask for professional help if necessary, and keep your home safe and beautiful.

Leave a comment